| View previous topic :: View next topic |
| Author |
Message |
myheadhertz
Nubbin
Joined: 22 Nov 2007
Posts: 69
Location: Wisconsin
|
 Posted:Tue Oct 28, 2008 2:38 pm Post subject |
    |
|
Anybody eles have this happen?
When I initially turn on the cold stove, the green error light blinks. I have to turn the stove OFF / ON again to clear the error. This is not really a serious problem - just takes an extra turn of the switch to get started. The stove is 3 years old and never did this before. Wondering if anyone eles has to do this? That blinking green scares me!
_________________
Golden Grain 1101
$787,000,000,000.00 |
|
| Back to top |
|
 |
|
|
weedonfarms
Learner Burner
Joined: 09 Dec 2008
Posts: 25
Location: Chebanse, IL
|
| Posted:Fri Jan 30, 2009 10:15 am Post subject |
|
|
| Mine would do that when first started while waiting to get up to heat as it took to long, Well i found out it was the thermo disk on the exhaust tube that was bad. It is the one that turnes the room blower on when it gets up to heat. Replaced it and all works well now. Found out it was bad when I smelt burning paint as when it failed the burn pot kept going but with no blower it got real hot! Put in a jumper wire till the new part got here and all is fine now. |
|
| Back to top |
|
|
|
