TraegerSolutions:23
From Cornburning
| Traeger Docs |
|---|
Boiler |
| Specifications |
| Components |
| Installation |
| Controls |
| Wiring |
Operation |
| Burning Corn |
| Burning Pellets |
| Boiler Startup |
Maintenance |
| Burnpot Changing |
| Cleaning |
| End of Year |
Troubleshooting |
| General |
| No Heat |
| Performance |
| Excess Waste |
Historical |
| Boiler Designs |
| Burnpot Designs |
| View this alone |
[edit]
Loose coupling on cup drive assembly
Remedy: Tighten set screw down onto flat part of shafts with allen wrench. Remember that the motor can be turning and everything looks like it is moving, but actually the couplings are just turning, not the shaft of the cup.
This image shows the allen screws on the lovejoy connector between the two shafts. If you look closely between the couplers you can see if the shaft itself is turning.
